 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Series DSD, DLD Time Delay Relay * 10-50 Amp * DC Control, AC Output * External Adjustment * Industry Standard Package * Zero Voltage Turn-On * Panel Mount These "on-operate" (pull-in) time-delay solid state relays are housed in a single industry standard package. AC output is controlled by a DC input and has an externally adjustable time delay. Choices include models with two timedelay ranges. Manufactured in Crydom''s ISO 9001 Certified facility for optimum product performance and reliability. DLD2410 DLD2425 DLD2450 MODEL NUMBERS DSD2410 DSD2425 DSD2450 OUTPUT SPECIFICATIONS Operating Voltage Range (47-63 Hz) [Vrms] Load Current Range 48-280 .04-10 600 120 1.6 1.48 60 10 500 48-280 .04-25 600 250 1.6 1.02 260 10 500 48-280 .04-50 600 625 1.6 0.63 1620 10 500 48-280 .04-10 600 120 1.6 1.48 60 10 500 48-280 .04-25 600 250 1.6 1.02 260 10 500 48-280 .04-50 600 625 1.6 0.63 1620 10 500 [Arms] Transient Overvoltage [Vpk] Max. Surge Current, (16.6ms) [Apk] Max. On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case [R JC ] Maximum I 2 t for Fusing, (8.3 msec.) [A 2sec] Max. Off-State Leakage Current @ Rated Voltage [mArms] Min. Off-State dv/dt @ Max. Rated Voltage [V/sec] Max. Turn-On Time Max. Turn-Off Time Max. Reset Time [sec] 1/2 cycle Adjustable, See Table 1/2 cycle 100 0.5 1/2 cycle 100 0.5 1/2 cycle 100 0.5 1/2 cycle 100 0.5 1/2 cycle 100 0.5 100 0.5 Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS Control Voltage Range Max. Turn-On Voltage Min. Turn-Off Voltage Min. Input Impedance Typical Input Current DC CONTROL 3.5-15Vdc 3.5 Vdc 1.0 Vdc 1500 Ohms O (Short) 10K 100K 470K 1.0M TYPICAL TURN-ON DELAY RESISTOR TIME (DSD) 0.10 sec 0.19 sec 0.94 sec 4.0 sec 8.3 sec TIME (DLD) 1.6 sec 3.1 sec 15 sec 64 sec 133 sec 3.4mA @ 5 Vdc, 11.4mA @ 15Vdc GENERAL NOTES (c) 2002 CRYDOM CORP, Specifications subject to change without notice. All parameters at 25C unless otherwise specified. Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Heat sinking required, for derating curves see page 2. Timing Resistor may be as high as 10M Ohm with performance dependent on resistor quality. Before and after time-out. FastFax Document No. 201 DSD,DLD. Rev.021302 PAGE 1 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 Series DSD, DLD Time Delay Relay * 10-50 Amp GENERAL SPECIFICATIONS Dielectric Strength, Input section/output/base Insulation Resistance @ 500Vdc Ambient Operating Temperature Range Ambient Storage Temperature Range MECHANICAL SPECIFICATIONS Weight: (typical) Encapsulation: Terminals: WIRING DIAGRAM 4000 Vrms 1010 -30 to 80C -40 to 125C 3.0 oz. (43g) Thermally Conductive Epoxy Screws and Saddle Clamps Furnished, Unmounted ~ 1 OUTPUT 1.10 (27.9) .45 (11.4) 8-32 TERMINAL (2 PLACES ) 2 1.87 (47.5) TIME DELAY RELAY 2.30 (58.4) 1.70 (43.2) 4A 4B 3B 3A INPUT -- Timing Resistor + 1.00 (25.4) 1.80 (45.7) .250 (6.35) FASTON TERMINAL .187 X .032 4 PLCS. .78 (19.8) .87 (22.2) DC CONTROL All dimensions are in inches (millimeters) CURRENT DERATING CURVES 10A 12 7C/W 9C/W Power Dissipation 25A 3C/W Base Plate Temp [C] 50A 95 1C/W Base Plate Temp [C] 30 25 Power Dissipation 60 1C/W .5C/W 1.5C/W Power Dissipation 90 Base Plate Temp [C] 5C/W 110 100 3C/W 2C/W 8 115 4 NO HEATSINK 20 15 10 NO HEATSINK 40 2C/W 100 110 120 20 NO HEATSINK 110 5 0 2 4 6 8 10 20 40 60 80 Load Current [Arms] Max Ambient Temp. [C] 120 5 10 15 20 25 20 40 60 80 0 10 20 30 40 120 80 0 Load Current [Arms] Max Ambient Temp. [C] 50 20 40 60 Load Current [Arms] Max Ambient Temp. [C] (c) 2002 CRYDOM CORP, Specifications subject to change without notice. APPROVALS UL E116949 FastFax Document No. 201 DSD,DLD. Rev.021302 PAGE 2 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 |
Price & Availability of DSD2410
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |